EV Chargers
Level 2 home chargers, panel capacity checks, permits and commercial or multifamily charging.
About ev chargersResort Electric · Hailey, Idaho
Shop, Barn and Outbuilding Wiring.
Resort Electric wires detached garages, shops, barns and ADUs across Blaine and Camas County. We plan the feed from the house or a new service, install the subpanel and wire the building for how you will actually use it, from Carey and Picabo to Fairfield.
Call (208) 928-4250
What's Included
What is included with shops and outbuildings service
- Shop, barn and outbuilding wiring: feeder sizing from the main panel or a new service
- Trenching coordination and conduit installation
- Subpanels for shops, barns and garages
- Lighting for work areas and stalls
- 240V circuits for welders, compressors and tools
- Stock tank heater and waterer circuits
- ADU electrical service and wiring
- Permits and inspection
When to Call Us
Signs it is time to call an electrician
- You are building a shop, barn, garage or ADU
- An outbuilding is running on an extension cord
- You need 240V for a welder, compressor or heater
- Your barn needs lighting or heated waterers
- An existing outbuilding feed trips or is undersized
- You are converting a building into living space
How It Works
How shops and outbuildings work gets done
- 01
Site and use review.
We look at the property, where the building is and what equipment it needs to run.
- 02
Feed plan.
We size the feeder or new service and plan the trench route with you or your excavator.
- 03
Permit and install.
We pull the permit, set conduit and subpanel and wire the building.
- 04
Inspection.
The trench, rough and final inspections are completed as required.
Local Conditions
Outbuilding wiring on Blaine and Camas County properties
Properties around Carey, Picabo, Gannett and Fairfield often have shops, barns and outbuildings a long way from the house. Distance affects wire size, so we size feeders for voltage drop, not just breaker size.
Frozen ground limits when trenching can happen. Planning the trench in late summer or fall, or setting conduit while an excavator is already on site, saves time and cost.
Barns and shops have dust, moisture and animals. We use wiring methods and fixtures suited to those conditions, and GFCI protection where water and livestock are involved.
Shop and barn projects in Carey, Picabo and Gannett in Blaine County, Idaho, and Fairfield in Camas County need feeders sized for distance and equipment loads.
Shops and Outbuildings for homes and businesses in Hailey, Ketchum, Sun Valley, Bellevue, Carey and Picabo and Fairfield and Camas County.
Questions
Shops and Outbuildings questions
How do I get power to a detached shop or barn?
Usually by running a feeder from your main panel through buried conduit to a subpanel in the building. If the building is far away or has large loads, a separate service from Idaho Power may make more sense. We look at distance, loads and your panel and recommend the better option.
Who does the trenching?
Either your excavator or one we coordinate with. We specify the trench depth and conduit, are on site to set conduit and pull wire, and schedule any required trench inspection before backfill. If an excavator is already working on your property, that is the best time to set conduit.
Can my shop run a welder and compressor?
Yes, with a feeder and subpanel sized for them. Tell us the equipment you have or plan to buy. We size the feeder and circuits for the actual loads, including motor starting, so tools run without dimming lights or tripping breakers.
Can you wire an ADU?
Yes. An ADU needs electrical service sized for a living space, including heat, kitchen and bath circuits, smoke and CO detectors and sometimes its own meter. We look at whether your main service can carry it and work with your builder through inspection.
Related Services
All servicesRelated electrical services
Panel Upgrades
200 amp and larger service, fuse box conversions, recalled panels and capacity for new loads.
About panel upgrades
New Construction
Custom homes and additions from plan review and rough-in to final inspection.
About new constructionGet an Estimate
Request an estimate for shops and outbuildings
Tell us what you need and where the property is. For anything urgent, call (208) 928-4250.